Your data contains incorrect overprint settings (special colour).
NOT producible with print approval!
Your finishing is not set to overprint but to omit. This way, the design is hidden under the finishing.
Please send the complete artwork files, including any corrections, for further processing of your job.
Your data contains wrong overprint settings.
NOT producible with print approval!
Explanation: Colours incorrectly defined as overprint are a common error in documents, as the resulting mix of foreground and background colours often does not appear on screen or on many colour printers and proofing devices. This can lead to unpleasant surprises at the time of printing.
Correction note: There must be no other colour below the spot colour.
It is not clear where the front page of your folder should be.
Producible with print approval (When specifying the title page)!
Your artwork files do not show which page is the cover after folding.
Explanation: For folders, we need the pages completely imposed and information about the cover page after folding.
Please let us know where the cover page should be - if necessary we will rearrange your job.
Your font is damaged.
NOT producible with print approval!
Unfortunately, we cannot process the artwork files you sent us because your fonts are damaged.Damage to the font can be due to several reasons.
Please ensure that you have all the necessary licences for the fonts you are using. Unfortunately, this rarely applies to free fonts, for example.
Incomplete embedding of the characters can also be a reason. Please check if your PDF contains all the necessary characters.
You also have the option of converting the texts into paths or sending us a JPEG or TIFF (please ensure the correct resolution!).
Bleed missing
Producible with print approval!
To enable borderless printing, we require a bleed in your artwork files. This is a coloured area around the printed image where the cutting takes place. Without bleed, white lines may appear in the edge area during cutting, so-called flashes.
The bleed should always be filled with the background area or background of the print image.
Please also note the required safety margin in the print image to avoid important design elements or texts from being cut.
There are crop marks within the printed image.
NOT producible with print approval!
Your print data contains crop marks within the print area that will be visible in the end product.
Please check your data to see whether these crop marks should also be printed because you will be processing the end product yourself or whether there is an error here.